Sole F80 Motor Control Board (2006 - 2010) 110v

Question

Q: The treadmill powers on fine, and the console displays as expected (version, lights, etc.). When press the start button to start the workout, the treadmill begins the countdown, but after I hear a click and the power shuts off, and it trips the breaker. I’ve opened the treadmill and tried troubleshooting: - Disconnected the main motor from the control board. - Disconnected the incline motor from the control board. Even with both motors disconnected, the same issue happens: the breaker trips after the click. The power light remains on, and everything on the console works until I attempt to start the belt. I would appreciate your support. Serial number: 5808880812009125REV-02 Shipped Date: 2009-01-20

Asked by: ExtJac - 11/18/2024

Submit an answer

Q: What is your return policy, I believe my board is bad on my sole treadmill, but I’m not sure, would like to try product and return if treadmill doesn’t work. If no returns allowed I would like to talk To someone who can review my diagnostics. Thank you

Asked by: Thomas Nugent - 4/2/2024

Submit an answer

Q: is this Sole part number D010007 ?

Asked by: Lawrence Pitzer - 6/19/2024

Submit an answer

Q: While using my Sole F80 it just stop working with just the LS (slow speed) error code, I've tried to re-calibrating but the process stuck on adjust the maximum speed and go no further. Is the controller board broken ? (ALT-6330 Ver 1.4). Thank you

Asked by: Minh Trinh - 8/25/2024

Submit an answer

Q: Have Sole F80, Serial #5808870801007542Rev-01. Top display lights up, software ver 1.2. Will not start. Able to get into factory settings (start+fast+safety key) but "enter" is not responsive. Upper fans do not switch on. The "power" led is on. The "down" led briefly flashes a couple of seconds after the safety key is inserted, and stays off. Is this proof the motor control board (p/n SOL0448-1) is faulty, or can it be something else? My control board is labeled ALT-6330A. Treadmill has been used about once a week and has. been carefully maintained. Thank you.

Asked by: Antonio Couto - 11/5/2024

Submit an answer

Q: would this motor control board match up with the original on my Sole F80 2009 serial number 5808880812009695 rev-02?

Asked by: David Rasmussen - 1/8/2025

Submit an answer

Q: Sole F80. When I power it on and it goes through the initiation process it goes directly to the belt countdown and the belt begins to move. No buttons work. Belt runs at .5 mph.

Asked by: MJ - 1/18/2025

Submit an answer

Q: If I order this part and it doesn't resolve my LS1 error, can I return it? I'm pretty sure that my motor is good and that this is the issue, but it's a big expense to possibly be wrong.

Asked by: Brian - 3/28/2025

Submit an answer

Questions about this item? Ask here.

Accepted Answer

A: Hello Sir,
There is a short on you motor control board. Please see below for the most up to date controller for your model.

https://www.sole.parts/Sole-F63-Upgraded-Motor-Control-Board-2006--2015_p_994.html

Was this answer helpful? 0 of 1 Customer(s) found this Answer helpful.

Answer provided by: Vitu (11/19/2024)

Accepted Answer

A: Hello, please follow the link below to initiate a return.

https://www.sole.parts/Returns_ep_7.html